Consultez notre Merch Loup EN LIGNE
Pompes subturbines pour eaux saumâtres et conditions extrêmes
Nécessite une taille de puits minimale de 5". Capacités jusqu'à 130 GPM.
Discharge adaptor – Cast iron Available in 2″ female tapered thread
Pump shaft – Chrome plated C1045 steel or stainless steel Machined, polished, and straightened
Bushings – Bronze, caoutchouc Buna-N, Vesconite
Intermediate bowl – Cast iron Threaded connections Reinforced flange, registered fit
Impeller – Stainless steel & Bronze. Open available for a variety of heads and capacities, balanced to reduce vibration
Collet – 416 stainless steel Split taper provides tight lock
Collier de sable – Bronze Restricts sand entry to motor bracket bushing
Support moteur – Cast iron Fits 4″ (10 cm) standard NEMA motors
Thrust collar – Bronze Provides optimal upthrust protection
Écran d'entrée – 416 stainless steel Limits entry of large objects into pump while allowing sufficient inflow of water
Accouplement moteur – 416 stainless steel Provides non-corrosive connection between motor and pump shafts
Garde-câble – stainless steel Provides motor lead protection
Taille de décharge | 2″ |
Moteur | 5 – 20 HP |
Hertz | 60 Hz |
Étapes | 1- 30 |
Couler | 130 GPM (492 LPM) |
Type de turbine | Open |
Discharge adaptor – Cast iron Available in 2″ female tapered thread
Pump shaft – Chrome plated C1045 steel or stainless steel Machined, polished, and straightened
Bushings – Bronze, caoutchouc Buna-N, Vesconite
Intermediate bowl – Cast iron Threaded connections Reinforced flange, registered fit
Impeller – Stainless steel & Bronze. Open available for a variety of heads and capacities, balanced to reduce vibration
Collet – 416 stainless steel Split taper provides tight lock
Collier de sable – Bronze Restricts sand entry to motor bracket bushing
Support moteur – Cast iron Fits 4″ (10 cm) standard NEMA motors
Thrust collar – Bronze Provides optimal upthrust protection
Écran d'entrée – 416 stainless steel Limits entry of large objects into pump while allowing sufficient inflow of water
Accouplement moteur – 416 stainless steel Provides non-corrosive connection between motor and pump shafts
Garde-câble – stainless steel Provides motor lead protection
Taille de décharge | 2″ |
Moteur | 5 – 20 HP |
Hertz | 60 Hz |
Étapes | 1- 30 |
Couler | 130 GPM (492 LPM) |
Type de turbine | Open |