Consultez notre Merch Loup EN LIGNE
Pompes subturbines pour eaux saumâtres et conditions extrêmes
Nécessite un puits d'une taille minimale de 6". Capacités jusqu'à 390 GPM.
Discharge adaptor – Cast iron Available in 3″ and 4″ female, tapered thread
Pump shaft – Chrome plated C1045 steel or stainless steel Machined, polished, and straightened
Bushings – Bronze, caoutchouc Buna-N, Vesconite
Intermediate bowl – Cast iron baked-on porcelain lining, threaded connections, reinforced flange, registered fit. Available in unlined.
Impeller – Bronze (some models available in stainless steel)
Collet – 416 stainless steel split taper provides tight lock
Collier de sable – Bronze restricts sand entry to motor bracket bushing
Support moteur – Cast iron fits 6″ (15 cm) standard NEMA motors, 5L and 5H available with 4″ NEMA standard bracket
Thrust collar – Bronze provides optimal upthrust protection
Écran d'entrée – 416 stainless steel Limits entry of large objects into pump while allowing sufficient inflow of water
Accouplement moteur – 416 stainless steel provides non-corrosive connection between motor and pump shafts
Garde-câble – Stainless steel provides motor lead protection ductile iron castings in stock
Moteur | 2 – 60 HP |
Hertz | 60 Hz |
Taille de décharge | 3″ female or 4″ male |
Couler | 360 GPM (1,363 LPM) |
Type de turbine | Enclosed/Open |
DOE Compliance Values | ||
Model | Impeller Diameter | P.E.I. |
5LL5V | 4.125 | 0.89 |
5LL8V | 4.125 | 0.87 |
5ML6V | 4.515 | 0.99 |
5MM6V | 4.515 | 0.93 |
5MM8V | 4.515 | 0.91 |
5MH6V | 4.515 | 0.98 |
5MH7V | 4.515 | 0.96 |
5HH7V | 4.125 | 0.93 |
Discharge adaptor – Cast iron Available in 3″ and 4″ female, tapered thread
Pump shaft – Chrome plated C1045 steel or stainless steel Machined, polished, and straightened
Bushings – Bronze, caoutchouc Buna-N, Vesconite
Intermediate bowl – Cast iron baked-on porcelain lining, threaded connections, reinforced flange, registered fit. Available in unlined.
Impeller – Bronze (some models available in stainless steel)
Collet – 416 stainless steel split taper provides tight lock
Collier de sable – Bronze restricts sand entry to motor bracket bushing
Support moteur – Cast iron fits 6″ (15 cm) standard NEMA motors, 5L and 5H available with 4″ NEMA standard bracket
Thrust collar – Bronze provides optimal upthrust protection
Écran d'entrée – 416 stainless steel Limits entry of large objects into pump while allowing sufficient inflow of water
Accouplement moteur – 416 stainless steel provides non-corrosive connection between motor and pump shafts
Garde-câble – Stainless steel provides motor lead protection ductile iron castings in stock
Moteur | 2 – 60 HP |
Hertz | 60 Hz |
Taille de décharge | 3″ female or 4″ male |
Couler | 360 GPM (1,363 LPM) |
Type de turbine | Enclosed/Open |
DOE Compliance Values | ||
Model | Impeller Diameter | P.E.I. |
5LL5V | 4.125 | 0.89 |
5LL8V | 4.125 | 0.87 |
5ML6V | 4.515 | 0.99 |
5MM6V | 4.515 | 0.93 |
5MM8V | 4.515 | 0.91 |
5MH6V | 4.515 | 0.98 |
5MH7V | 4.515 | 0.96 |
5HH7V | 4.125 | 0.93 |