
Check our Wolf Merch ONLINE
Brackish Water & Extreme Condition Subturbine Pumps
Requires 7" minimum well size. Capacities to 500 GPM.
Discharge adapter – Cast iron Available in 3″ and 4″ female tapered thread (6M 4″ F only)
Pump shaft – Chrome plated C1045 steel or stainless steel Machined, polished, and straightened
Bushings – Bronze, Buna-N rubber, Vesconite
Intermediate bowl – Cast iron Baked-on porcelain lining, threaded connections Reinforced flange, registered fit
Impeller – Bronze (some models available in stainless steel) Open or enclosed design available for a variety of heads and capacities, balanced to reduce vibration
Collet – 416 stainless steel Split taper provides tight lock
Sand collar – Bronze Restricts sand entry to motor bracket bushing
Motor bracket – Cast iron Fits 6″ (15 cm) standard NEMA motors, 8″ (20 cm) motor bracket available
Thrust collar – Bronze Provides optimal up-thrust protection
Inlet screen – 416 stainless steel Limits entry of large objects into pump while allowing sufficient inflow of water
Motor coupling – 416 stainless steel Provides non-corrosive connection between motor and pump shafts
Cable guard – stainless steel Provides motor lead protection
Ductile iron castings in stock
Motor | 5 – 60 HP |
Hertz | 60 Hz |
Discharge Size | 3″F-4″M Varies by Model |
Stages | 1 – 24 |
Flow | 500 GPM (1,893 LPM) |
Impeller Type | Enclosed |
|
Model | Impeller Diameter | P.E.I. |
6LL6V | 4.515 | 0.93 |
6LM6V | 4.515 | 0.88 |
6LM8V | 4.515 | 0.88 |
6LH6V | 4.515 | 0.93 |
6LH7V | 4.515 | 0.91 |
6MM8V | 4.75 | 0.87 |
6HH7V | 4.515 | 0.99 |
Discharge adapter – Cast iron Available in 3″ and 4″ female tapered thread (6M 4″ F only)
Pump shaft – Chrome plated C1045 steel or stainless steel Machined, polished, and straightened
Bushings – Bronze, Buna-N rubber, Vesconite
Intermediate bowl – Cast iron Baked-on porcelain lining, threaded connections Reinforced flange, registered fit
Impeller – Bronze (some models available in stainless steel) Open or enclosed design available for a variety of heads and capacities, balanced to reduce vibration
Collet – 416 stainless steel Split taper provides tight lock
Sand collar – Bronze Restricts sand entry to motor bracket bushing
Motor bracket – Cast iron Fits 6″ (15 cm) standard NEMA motors, 8″ (20 cm) motor bracket available
Thrust collar – Bronze Provides optimal up-thrust protection
Inlet screen – 416 stainless steel Limits entry of large objects into pump while allowing sufficient inflow of water
Motor coupling – 416 stainless steel Provides non-corrosive connection between motor and pump shafts
Cable guard – stainless steel Provides motor lead protection
Ductile iron castings in stock
Motor | 5 – 60 HP |
Hertz | 60 Hz |
Discharge Size | 3″F-4″M Varies by Model |
Stages | 1 – 24 |
Flow | 500 GPM (1,893 LPM) |
Impeller Type | Enclosed |
|
Model | Impeller Diameter | P.E.I. |
6LL6V | 4.515 | 0.93 |
6LM6V | 4.515 | 0.88 |
6LM8V | 4.515 | 0.88 |
6LH6V | 4.515 | 0.93 |
6LH7V | 4.515 | 0.91 |
6MM8V | 4.75 | 0.87 |
6HH7V | 4.515 | 0.99 |