
Check our Wolf Merch ONLINE
Brackish Water & Extreme Condition Subturbine Pumps
Requires 8" minimum well size. Capacities to 1100 GPM.
Discharge assembly – black steel, cast iron, ductile, bushing and collar style. Discharge assemblies with upthrust protection available on most models.
Pump shaft – chrome plated C-1045, 416 & 17-4 stainless steel. Machined, polished and straightened.
Bushings – Bronze, Buna-N rubber, Vesconite
Intermediate bowl – close grained cast iron, and ductile. Baked on porcelain lining Threaded connections Reinforced flange Registered fit.
Impeller – bronze – Sae 40, 304 stainless steel. Closed design available in a variety of capacities Balanced to reduce vibration.
Collet – 416 stainless steel. Split taper provides tight lock.
Sand collar – bronze – Sae 660. Restricts sand entry to motor bracket bushing.
Motor bracket – close grained cast iron, ductile. Closed design for added motor protection. Available for 6” and 8” standard NEMA motors.
Upthrust bushing – bronze – Sae 660, UHMW. Restrains initial upthrust.
Inlet screen – stainless steel T304. Limits entry of large objects into pump.
Motor coupling – 416 stainless steel. Provides non-corrosive connection between motor and pump shaft.
Cable guard – stainless steel. Provides motor lead protection.
Motor | 7-1/2 – 150 HP |
Hertz | 60 Hz |
Discharge Size | 4″ female, 5″ female, or 6″ male |
Stages | 1 – 15 |
Flow | 1100 GPM (4,164 LPM) |
Impeller Type | Enclosed |
|
Discharge assembly – black steel, cast iron, ductile, bushing and collar style. Discharge assemblies with upthrust protection available on most models.
Pump shaft – chrome plated C-1045, 416 & 17-4 stainless steel. Machined, polished and straightened.
Bushings – Bronze, Buna-N rubber, Vesconite
Intermediate bowl – close grained cast iron, and ductile. Baked on porcelain lining Threaded connections Reinforced flange Registered fit.
Impeller – bronze – Sae 40, 304 stainless steel. Closed design available in a variety of capacities Balanced to reduce vibration.
Collet – 416 stainless steel. Split taper provides tight lock.
Sand collar – bronze – Sae 660. Restricts sand entry to motor bracket bushing.
Motor bracket – close grained cast iron, ductile. Closed design for added motor protection. Available for 6” and 8” standard NEMA motors.
Upthrust bushing – bronze – Sae 660, UHMW. Restrains initial upthrust.
Inlet screen – stainless steel T304. Limits entry of large objects into pump.
Motor coupling – 416 stainless steel. Provides non-corrosive connection between motor and pump shaft.
Cable guard – stainless steel. Provides motor lead protection.
Motor | 7-1/2 – 150 HP |
Hertz | 60 Hz |
Discharge Size | 4″ female, 5″ female, or 6″ male |
Stages | 1 – 15 |
Flow | 1100 GPM (4,164 LPM) |
Impeller Type | Enclosed |
|