
Check our Wolf Merch ONLINE
Brackish Water & Extreme Condition Subturbine Pumps
Requires 9" minimum well size. Capacities to 1,000 GPM.
Discharge adapter– Ductile iron 4″ & 6″ female
Pump shaft – Chrome plated C-1045, or stainless steel machined, polished and straightened
Bushings – Bronze, Buna N rubber, or Vesconite
Intermediate bowl – Close grained cast iron baked on porcelain lining, threaded connections, reinforced flange
Impeller – Bronze, – stainless steel available in some models. Closed design available in a variety of capacities. Balanced to reduce vibration
Collet – 416 stainless steel. Split taper provides tight lock
Sand collar – Bronze. Restricts sand entry to motor bracket bushing
Motor bracket – Close grained cast iron closed design for added motor protection. Available for 6” (15 cm) and 8” (20 cm) standard NEMA motors
Upthrust bushing – Bronze. Restrains initial upthrust
Inlet screen – Stainless steel T304. Limits entry of large objects into pump
Motor coupling – 416 stainless steel. Provides non-corrosive connection between motor and pump shaft
Cable guard – Stainless steel. Provides motor lead protection
Material Type – Ductile iron casting
Motor | 7-1/2 – 60 HP |
Hertz | 60 Hz |
Discharge Size | 4″female or 6″ female |
Stages | 1 – 6 |
Flow | 1,000 GPM (3,785 LPM) |
Impeller Type | Enclosed |
|
Discharge adapter– Ductile iron 4″ & 6″ female
Pump shaft – Chrome plated C-1045, or stainless steel machined, polished and straightened
Bushings – Bronze, Buna N rubber, or Vesconite
Intermediate bowl – Close grained cast iron baked on porcelain lining, threaded connections, reinforced flange
Impeller – Bronze, – stainless steel available in some models. Closed design available in a variety of capacities. Balanced to reduce vibration
Collet – 416 stainless steel. Split taper provides tight lock
Sand collar – Bronze. Restricts sand entry to motor bracket bushing
Motor bracket – Close grained cast iron closed design for added motor protection. Available for 6” (15 cm) and 8” (20 cm) standard NEMA motors
Upthrust bushing – Bronze. Restrains initial upthrust
Inlet screen – Stainless steel T304. Limits entry of large objects into pump
Motor coupling – 416 stainless steel. Provides non-corrosive connection between motor and pump shaft
Cable guard – Stainless steel. Provides motor lead protection
Material Type – Ductile iron casting
Motor | 7-1/2 – 60 HP |
Hertz | 60 Hz |
Discharge Size | 4″female or 6″ female |
Stages | 1 – 6 |
Flow | 1,000 GPM (3,785 LPM) |
Impeller Type | Enclosed |
|