查看我們的 Wolf 商品 在線的
苦鹹水和極端條件渦輪泵
最小孔尺寸需要 6"。容量高達 390 GPM。
Discharge adaptor – Cast iron Available in 3″ and 4″ female, tapered thread
泵浦軸 – Chrome plated C1045 steel or stainless steel Machined, polished, and straightened
襯套 – Bronze, Buna-N rubber, Vesconite
中間碗 – Cast iron baked-on porcelain lining, threaded connections, reinforced flange, registered fit. Available in unlined.
葉輪 – Bronze (some models available in stainless steel)
夾頭 – 416 不鏽鋼分離錐度提供緊密鎖定
沙領 – 青銅限製沙子進入馬達支架襯套
馬達支架 – Cast iron fits 6″ (15 cm) standard NEMA motors, 5L and 5H available with 4″ NEMA standard bracket
止推環 – 青銅提供最佳的上推保護
入口螢幕 – 416 stainless steel Limits entry of large objects into pump while allowing sufficient inflow of water
馬達聯軸器 – 416 不鏽鋼在馬達和幫浦軸之間提供防腐蝕連接
電纜護套 – Stainless steel provides motor lead protection ductile iron castings in stock
引擎 | 2 – 60 HP |
赫茲 | 60赫茲 |
排料尺寸 | 3吋母頭或4吋公頭 |
流動 | 360 GPM (1,363 LPM) |
葉輪類型 | Enclosed/Open |
DOE Compliance Values | ||
Model | Impeller Diameter | P.E.I. |
5LL5V | 4.125 | 0.89 |
5LL8V | 4.125 | 0.87 |
5ML6V | 4.515 | 0.99 |
5MM6V | 4.515 | 0.93 |
5MM8V | 4.515 | 0.91 |
5MH6V | 4.515 | 0.98 |
5MH7V | 4.515 | 0.96 |
5HH7V | 4.125 | 0.93 |
Discharge adaptor – Cast iron Available in 3″ and 4″ female, tapered thread
泵浦軸 – Chrome plated C1045 steel or stainless steel Machined, polished, and straightened
襯套 – Bronze, Buna-N rubber, Vesconite
中間碗 – Cast iron baked-on porcelain lining, threaded connections, reinforced flange, registered fit. Available in unlined.
葉輪 – Bronze (some models available in stainless steel)
夾頭 – 416 不鏽鋼分離錐度提供緊密鎖定
沙領 – 青銅限製沙子進入馬達支架襯套
馬達支架 – Cast iron fits 6″ (15 cm) standard NEMA motors, 5L and 5H available with 4″ NEMA standard bracket
止推環 – 青銅提供最佳的上推保護
入口螢幕 – 416 stainless steel Limits entry of large objects into pump while allowing sufficient inflow of water
馬達聯軸器 – 416 不鏽鋼在馬達和幫浦軸之間提供防腐蝕連接
電纜護套 – Stainless steel provides motor lead protection ductile iron castings in stock
引擎 | 2 – 60 HP |
赫茲 | 60赫茲 |
排料尺寸 | 3吋母頭或4吋公頭 |
流動 | 360 GPM (1,363 LPM) |
葉輪類型 | Enclosed/Open |
DOE Compliance Values | ||
Model | Impeller Diameter | P.E.I. |
5LL5V | 4.125 | 0.89 |
5LL8V | 4.125 | 0.87 |
5ML6V | 4.515 | 0.99 |
5MM6V | 4.515 | 0.93 |
5MM8V | 4.515 | 0.91 |
5MH6V | 4.515 | 0.98 |
5MH7V | 4.515 | 0.96 |
5HH7V | 4.125 | 0.93 |