Mira nuestra Wolf Merch EN LÍNEA
Bombas subturbinas para agua salobre y condiciones extremas
Requires 9" minimum well size. Capacities to 1,000 GPM.
Discharge adapter– Ductile iron 4″ & 6″ female
Pump shaft – Chrome plated C-1045, or stainless steel machined, polished and straightened
Bujes – Bronze, Buna N rubber, or Vesconite
Intermediate bowl – Close grained cast iron baked on porcelain lining, threaded connections, reinforced flange
Impeller – Bronze, – stainless steel available in some models. Closed design available in a variety of capacities. Balanced to reduce vibration
Coronilla – 416 stainless steel. Split taper provides tight lock
Collar arena – Bronze. Restricts sand entry to motor bracket bushing
Soporte del motor – Close grained cast iron closed design for added motor protection. Available for 6” (15 cm) and 8” (20 cm) standard NEMA motors
Upthrust bushing – Bronze. Restrains initial upthrust
Pantalla de entrada – Stainless steel T304. Limits entry of large objects into pump
Acoplamiento de motor – 416 stainless steel. Provides non-corrosive connection between motor and pump shaft
Protector de cables – Stainless steel. Provides motor lead protection
Material Type – Ductile iron casting
Motor | 7-1/2 – 60 HP |
hercios | 60Hz |
Tamaño de descarga | 4″female or 6″ female |
Etapas | 1 – 6 |
Fluir | 1,000 GPM (3,785 LPM) |
Tipo de impulsor | Adjunto |
Discharge adapter– Ductile iron 4″ & 6″ female
Pump shaft – Chrome plated C-1045, or stainless steel machined, polished and straightened
Bujes – Bronze, Buna N rubber, or Vesconite
Intermediate bowl – Close grained cast iron baked on porcelain lining, threaded connections, reinforced flange
Impeller – Bronze, – stainless steel available in some models. Closed design available in a variety of capacities. Balanced to reduce vibration
Coronilla – 416 stainless steel. Split taper provides tight lock
Collar arena – Bronze. Restricts sand entry to motor bracket bushing
Soporte del motor – Close grained cast iron closed design for added motor protection. Available for 6” (15 cm) and 8” (20 cm) standard NEMA motors
Upthrust bushing – Bronze. Restrains initial upthrust
Pantalla de entrada – Stainless steel T304. Limits entry of large objects into pump
Acoplamiento de motor – 416 stainless steel. Provides non-corrosive connection between motor and pump shaft
Protector de cables – Stainless steel. Provides motor lead protection
Material Type – Ductile iron casting
Motor | 7-1/2 – 60 HP |
hercios | 60Hz |
Tamaño de descarga | 4″female or 6″ female |
Etapas | 1 – 6 |
Fluir | 1,000 GPM (3,785 LPM) |
Tipo de impulsor | Adjunto |