
Check our Wolf Merch ONLINE
Brackish Water & Extreme Condition Subturbine Pumps
Requires 7" minimum well size. Capacities to 400 GPM.
Discharge adapter – Cast iron available in 3″ and 4″ female tapered thread
Pump shaft – Chrome plated C1045 steel or stainless steel. Machined, polished, and straightened
Bushings – Motor bracket – Bronze, Buna-N rubber. Intermediate bowl – Buna-N rubber or bronze
Intermediate bowl – Cast iron baked-on porcelain lining, threaded connections reinforced flange, registered fit
Impeller – Bronze open design available for a variety of heads and capacities, balanced to reduce vibration
Collet – 416 stainless steel split taper provides tight lock
Sand collar – Bronze restricts sand entry to motor bracket bushing
Motor bracket – Cast iron fits 6″ (15 cm) standard NEMA motors
Thrust collar – Bronze provides optimal upthrust protection
Inlet screen – 416 stainless steel limits entry of large objects into pump while allowing sufficient inflow of water
Motor coupling – 416 stainless steel provides non-corrosive connection between motor and pump shafts
Cable guard – Stainless steel provides motor lead protection
Material Type – Ductile iron and stainless steel castings in stock
Motor | 5 – 60 HP |
Hertz | 60 Hz |
Discharge Size | 3″ female or 4″ male |
Stages | 1 – 16 |
Flow | 400 GPM (1,514 LPM) |
Impeller Type | Open |
|
Discharge adapter – Cast iron available in 3″ and 4″ female tapered thread
Pump shaft – Chrome plated C1045 steel or stainless steel. Machined, polished, and straightened
Bushings – Motor bracket – Bronze, Buna-N rubber. Intermediate bowl – Buna-N rubber or bronze
Intermediate bowl – Cast iron baked-on porcelain lining, threaded connections reinforced flange, registered fit
Impeller – Bronze open design available for a variety of heads and capacities, balanced to reduce vibration
Collet – 416 stainless steel split taper provides tight lock
Sand collar – Bronze restricts sand entry to motor bracket bushing
Motor bracket – Cast iron fits 6″ (15 cm) standard NEMA motors
Thrust collar – Bronze provides optimal upthrust protection
Inlet screen – 416 stainless steel limits entry of large objects into pump while allowing sufficient inflow of water
Motor coupling – 416 stainless steel provides non-corrosive connection between motor and pump shafts
Cable guard – Stainless steel provides motor lead protection
Material Type – Ductile iron and stainless steel castings in stock
Motor | 5 – 60 HP |
Hertz | 60 Hz |
Discharge Size | 3″ female or 4″ male |
Stages | 1 – 16 |
Flow | 400 GPM (1,514 LPM) |
Impeller Type | Open |
|